Comp II LED Comp II SCX Black SCX Silver SCX White 60s Muscle MINI Factory Match Liquid Filled Non-Filled Direct Mount Engine Thermometers Accessories All Gauges
1" Dial (K) 1½" Dial (A) 2¼" Dial (B) 3" Dial (E) 3" Asphalt (E) 3" Bottom Mount (J) 3" Asphalt (J) 3" Adjustable (ADJ3) 5" Dial (G) 5" Adjustable (ADJ5) 5" Bottom Mount (GJ) Engine Thermometers Capillary Industrial All Thermometers
Utility, Lower Mount SS/Brass, Lower Mount SS/Brass, Center Back SS/Brass, U-Clamp SS/Brass, Panel Mount All SS, Lower Mount All SS, Panel Mount 4" All SS 4.5" Process Gauges
2" All SS (Q3) 2½" All SS (K) 2½" SS/Brass (J) 4" All SS (G) 4½" Process (MPB/SC) 6" All SS (H) All McDaniel Gauges
General Service Severe Service 63mm Severe Service 100mm Diaphragm Gauges Process Gauges All MARSH Gauges MARSH PDF Catalog
Address, Phone, Fax Request Info
Contact Us About Marshall Search Catalog FAQs Site Index

OEM and Private Label Voltmeters

Marshall Instruments specializes in OEM, private label and custom voltmeters. Contact us today to discuss your requirements.

Marshall Volt Gauges
View All Volts Gauges

Voltmeters monitor electrical system voltage to ensure proper operation of the charging system and also to monitor battery levels when the key is on and the engine is not running.

  • Ensuring that the system voltage is at the proper level.
  • Ensuring battery has a full charge for optimum ignition operation
  • Indication of under or over charging of the battery
  • Monitoring battery charge when powering accessories without the engine running (i.e. video/game stations/audio systems/lighting)
  • Monitoring battery charge when working on a vehicle with the key on but When the engine is running, the needle will indicate the current electrical system voltage. When the engine is not running but the key is on, the needle will indicate the current batter charge level.

A constant reading in the 10-11V or 15-16V area indicates a need for a complete check of either the battery or generating system.

Marshall voltmeters are connected via wires to a switched 12V power source. This source is the voltage that the voltmeter will indicate. No sender is required for use with a voltmeter.

About Us · Search Catalog · FAQs · Contact · Site Map · Home

©2022 Marshall Instruments, Inc.
Design: BWE, Inc.

  Auto Gauges Thermometers McDaniel Marsh