Search:


Comp II LED Comp II SCX Black SCX Silver SCX White 60s Muscle MINI Factory Match Liquid Filled Non-Filled Direct Mount Engine Thermometers Accessories All Gauges
1" Dial (K) 1½" Dial (A) 2¼" Dial (B) 3" Dial (E) 3" Asphalt (E) 3" Bottom Mount (J) 3" Asphalt (J) 3" Adjustable (ADJ3) 5" Dial (G) 5" Adjustable (ADJ5) 5" Bottom Mount (GJ) Engine Thermometers Capillary Industrial All Thermometers
Utility, Lower Mount SS/Brass, Lower Mount SS/Brass, Center Back SS/Brass, U-Clamp SS/Brass, Panel Mount All SS, Lower Mount All SS, Panel Mount 4" All SS 4.5" Process Gauges
2" All SS (Q3) 2½" All SS (K) 2½" SS/Brass (J) 4" All SS (G) 4½" Process (MPB/SC) 6" All SS (H) All McDaniel Gauges
General Service Severe Service 63mm Severe Service 100mm Diaphragm Gauges Process Gauges All MARSH Gauges MARSH PDF Catalog
Address, Phone, Fax Request Info
Contact Us About Marshall Search Catalog FAQs Site Index

Oil Pressure Sender (3-160 Ohm)
Item: 9200

Oil Pressure Sender (3-160 Ohm) Accessories from Marshall Instruments
  Products > Accessories
Oil Pressure Sender (3-160 Ohm)
Item: 9200
Price: $32.95 ea.

Oil pressure sender (0-150 psi input, 3-160ohm output). Used for SCX full sweep 0-100 PSI oil pressure gauges* and Comp II short sweep 0-80 PSI gauges. Connection: 1/8" NPT.

Input/Output range:

  • 0 PSI = 3 ohms
  • 20 PSI = 23 ohms
  • 40 PSI = 43 ohms
  • 60 PSI = 69 ohms
  • 80 PSI = 94 ohms
  • 100 PSI = 118 ohms

*SCX gauges also use Item 9205. Verify which type of sender you have before ordering a replacement.

Connections
There are two versions of this sender: a type with a yellow label and a type with no label. See the following connection guidelines for each type.

Connections (Yellow Label):

  • Connect "WK" terminal to common ground
  • Connect "G" terminal to gauge input

Connections (No Label):

  • Do not connect anything to the WK terminal
  • Make sure the BODY of the sender is grounded
  • Connect "G" terminal to gauge input

Marshall Instruments
Accessories
Rev. 12/20/2016


About Us · Search Catalog · FAQs · Contact · Site Map · Home

©2018 Marshall Instruments, Inc.
Design: BWE, Inc.
  info@marshallinstruments.com
1-714-632-8565



  Auto Gauges Thermometers McDaniel Marsh