Search:


Comp II LED Comp II SCX Black SCX Silver SCX White 60s Muscle MINI Factory Match Liquid Filled Non-Filled Direct Mount Engine Thermometers Accessories All Gauges
1" Dial (K) 1½" Dial (A) 2¼" Dial (B) 3" Dial (E) 3" Asphalt (E) 3" Bottom Mount (J) 3" Asphalt (J) 3" Adjustable (ADJ3) 5" Dial (G) 5" Adjustable (ADJ5) 5" Bottom Mount (GJ) Engine Thermometers Capillary Industrial All Thermometers
Utility, Lower Mount SS/Brass, Lower Mount SS/Brass, Center Back SS/Brass, U-Clamp SS/Brass, Panel Mount All SS, Lower Mount All SS, Panel Mount 4" All SS 4.5" Process Gauges
2" All SS (Q3) 2½" All SS (K) 2½" SS/Brass (J) 4" All SS (G) 4½" Process (MPB/SC) 6" All SS (H) All McDaniel Gauges
General Service Severe Service 63mm Severe Service 100mm Diaphragm Gauges Process Gauges All MARSH Gauges MARSH PDF Catalog
Address, Phone, Fax Request Info
Contact Us About Marshall Search Catalog FAQs Site Index

Model ADJ-3: 3" Adjustable Angle Dial
Item: ADJ-3

Adjustable Angle Thermometer.  3 inch Dial

Technical Documents
Technical Documents
ADJ-3, ADJ-5: Drawings & Specifications (PDF)
Temperature Ranges Available (PDF)

FAQs
Frequently Asked Questions

  Products > Bimetal Thermometers
Model ADJ-3: 3" Adjustable Angle Dial
Item: ADJ-3

Marshall Instruments offers 3" heavy duty, industrial bimetallic thermometers with a versatile case and stem that can be adjusted to almost any angle for easy viewing. The head can be rotated and the stem positioning moves over 180 degrees. These thermometers are rugged and preferred by the process, offshore, power, pharmaceutical and chemical industries. The connection is 1/2" NPT, 1/4" NPT is also available. The thermometers may be glycerin or silicone filled for vibration dampening. Glass lens is standard, a plastic lens is available as an option. Standard stem diameter is 0.25" and heavy duty stems are available. A spiked stem tip is available. Stem length can be custom ordered from 2.5" to 92" in 1/4" increments. Accuracy is 1% of full scale.

General Information

  • DIAL: 3"
  • STEM DIAMETER: .25"
  • CONNECTION: 1/2" NPT
  • HARNESS: Head can be rotated 360 DEG and angled 180 DEG.
  • CONSTRUCTION: All stainless steel construction.
  • EXTERNAL RESET: Easy to recalibrate.
  • ACCURACY: +/- 1% of scale.
  • HERMETIC SEAL: Weather tight.
  • LENS: Glass
  • OVER RANGE: 50% to 500 DEGF and 10% over 500 DEGF.

Mountings
1/4" or 1/2" NPT.

Stem
18-8 Type 304 stainless steel, .250 diameter. Lengths from 2 1/2" to 84".

Head
Model ADJ-3: 3" diameter.

Made in the U.S.A.
This product is proudly made in Anaheim, California USA.

Made in USA

Marshall Instruments
Bimetal Thermometers
Rev. 1/7/2012


About Us · Search Catalog · FAQs · Contact · Site Map · Home

©2017 Marshall Instruments, Inc.
Design: BWE, Inc.
  info@marshallinstruments.com
1-714-632-8565



  Auto Gauges Thermometers McDaniel Marsh